project
Find What Suit to Your Project
Mould
position :
Home > Project > Mould >
1 Set Precast Segment Moulds for the Segmental Bridge Construction
Equipment supplied: 1 set Precast Segment Mould for the segmental bridge
Export Country: USA
Year: 17th Sept, 2017,

Sept.17, 2017. Through almost 4 months’ technical negotiated with our American client and make the final agreement about the Precast Segment Moulds for the segmental bridge construction.
The design width of the main line prefabricated section is 5.5 M, the beam height is 2.1 M, and the maximum weight of single segment is about 118 ton. The standard span of 30 meters is 11 pieces of prefabricated section, and the 35 M span is made up of 13 prefabricated segments.

The precast segment moulds play vital role in the production process. Huada Heavy Industry can provide the precast segment moulds for long line, short line and full span methods of casting for single and double box girder for casting of beams.

Besides, we also can offer an introduction instruction course regarding segment casting as below:
1.Long line(T/U/Box-Beam) & short line(segment)casting method.
2.Span by span VS balanced cantilever erection method.
3.Casting yard working flow.
4.Introduction-Terminology of precast segmental bridge.
    Previous:
    related products
      Single Girder Gantry Crane
      Single Girder Gantry Crane
      Electric Hoist Single Girder Gantry Crane is used together with CD MD Model electric hoists. It is a track travelling small and medium-sized crane...
      See Detail
      Double Girder Gantry Crane
      Double Girder Gantry Crane
      Gantry Crane is widely used outdoor on the big work yard to lift material. There is no need to install the steel stand column, therefore, Gantry Crane will not occupy too much ground space...
      See Detail
      Tyre Transporter
      Tyre Transporter
      Huada Heavy Industry also specializes in the design, manufacturing and supply of Transporters for transportation of precast full span girder, pre-cast segment or other structures. These Tyre Transporters' lifting capacities normally range from 50t to 900
      See Detail
      Straddle Carrier
      Straddle Carrier
      Straddle Carriers are basically lifting cranes mounted on tyres often used to replace gantry cranes for lifting and handling heavy loads in casting yards, factories, storage areas, ports...
      See Detail
      Segment Box Girder Mould
      Mould
      Huada Heavy Industry designs and builds Segment Box Girder Moulds for Full Span, Long Line and Short Line methods of casting for single, double, or triple Box Girder...
      See Detail
      Gantry Crane
      Gantry Crane
      Huada Heavy Industry Gantry Crane, are designed for a comprehensive use in the fabrication industry including casting yard or fabrication yard and most of the case it is outdoor usage. Standard and special portal cranes are manufactured and supply by Huad
      See Detail
      Overhead Segmental Launching Gantry
      Overhead Segmental Launching Gantry
      Precast Segmental Method with a Segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span...
      See Detail
      Underslung Segmental Launching Gantry
      Underslung Segmental Launching Gantry
      Precast Segmental Method with a Segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span...
      See Detail
      Inquiry
      If you have any questions about our products, please contact us in time, we will reply to you the first time
      Name :
      * Email :
      Tel :
      Country :
      * Messages :
      Send
      Reset
      Top