project
Find What Suit to Your Project
Mould
position :
Home > Project > Mould >
Long Line Method of Precast Segmental Bridge Girder Formwork
Huada Heavy Industry designs and export one set of precast segment bridge girder formwork to Colombia for highway bridge construction.

23th September, 2015, the precast segment bridge girder formwork were transported to the construction site. This design adopts the long line construction method. Our senior engineer and installation engineer arrive at the construction site for guidance on November 5 .

Long line method of precast segment bridge girder formwork:
Production methodology
Both elongation length and prestress force can be used to check that the correct stress levels are achieved. This cross-checking process ensures a safer, more controlled production process.
Efficiency
Long-line production generally uses less staff and materials.

Huada Heavy Industry Long-line method of precast segment bridge girder formwork with consistent quality and generally lower costs than the short-line method, and is generally more cost effective.

Segmental Bridge Formwork
Segmental Bridge Formwork
Segmental Bridge Formwork
related products
    Single Girder Gantry Crane
    Single Girder Gantry Crane
    Electric Hoist Single Girder Gantry Crane is used together with CD MD Model electric hoists. It is a track travelling small and medium-sized crane...
    See Detail
    Double Girder Gantry Crane
    Double Girder Gantry Crane
    Gantry Crane is widely used outdoor on the big work yard to lift material. There is no need to install the steel stand column, therefore, Gantry Crane will not occupy too much ground space...
    See Detail
    Tyre Transporter
    Tyre Transporter
    Huada Heavy Industry also specializes in the design, manufacturing and supply of Transporters for transportation of precast full span girder, pre-cast segment or other structures. These Tyre Transporters' lifting capacities normally range from 50t to 900
    See Detail
    Straddle Carrier
    Straddle Carrier
    Straddle Carriers are basically lifting cranes mounted on tyres often used to replace gantry cranes for lifting and handling heavy loads in casting yards, factories, storage areas, ports...
    See Detail
    Segment Box Girder Mould
    Mould
    Huada Heavy Industry designs and builds Segment Box Girder Moulds for Full Span, Long Line and Short Line methods of casting for single, double, or triple Box Girder...
    See Detail
    Gantry Crane
    Gantry Crane
    Huada Heavy Industry Gantry Crane, are designed for a comprehensive use in the fabrication industry including casting yard or fabrication yard and most of the case it is outdoor usage. Standard and special portal cranes are manufactured and supply by Huad
    See Detail
    Overhead Segmental Launching Gantry
    Overhead Segmental Launching Gantry
    Precast Segmental Method with a Segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span...
    See Detail
    Underslung Segmental Launching Gantry
    Underslung Segmental Launching Gantry
    Precast Segmental Method with a Segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span...
    See Detail
    Inquiry
    If you have any questions about our products, please contact us in time, we will reply to you the first time
    Name :
    * Email :
    Tel :
    Country :
    * Messages :
    Send
    Reset
    Top