project
Find What Suit to Your Project
Precast Mould
position :
Mould Project General Situation of Long Line Segment Casting for Spain Client
Product Name: Mould
Casting Method: Long Line Segment Casting
Whole Bridge Segment: 476 Pieces
Project Location: Spain

In the whole project, the straight span and pier segment adopt casting-in-situ method, the rest spans all use precast balancing cantilever method. Girder height at the box girder pedestal place is 7.0m (casting-in-situ), other precast girders and casting-in-situ girders weight are 6.0m. For segment casting method

Whole bridge length includes segment box girder 476 pieces. 4 m segments girders includes 368 pieces. 3.5m segment girders includes 56 pieces. 3m segment girders includes 4 pieces. 2m segment girders includes 48m. 0.5m wet joint seam includes 56 point.

In the project with long line segment casting method, the construction of continuous box girder with precast balancing cantilever method shall ensure that the joint between the girder and the girder joints is tight after installation.The integral linear shape of the continuous beam (including the linear and vertical lines) shall be guaranteed.

The mould project of long line segment casting, our overseas engineers have completed the inspection of electrical circuits and the commissioning of hydraulic devices, and the mould began to operate smoothly. 

Long Line Segment Casting
Long Line Segment Casting
Long Line Segment Casting
Next:
related products
    Precast Segment Mould
    Precast Mould
    Huada Heavy Industry specialized in design and production of precast segment mould, full span box girder mould, T beam mould, U beam mould, I beam mould, Pier mould, etc.
    See Detail
    Gantry Crane
    Gantry Crane
    Huada Heavy Industry Gantry Crane, are designed for a comprehensive use in the fabrication industry including casting yard or fabrication yard and most of the case it is outdoor usage. Standard and special portal cranes are manufactured and supply by Huad
    See Detail
    Overhead Segmental Launching Gantry
    Overhead Segmental Launching Gantry
    Precast Segmental Method with a Segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span...
    See Detail
    Underslung Segmental Launching Gantry
    Underslung Segmental Launching Gantry
    Precast Segmental Method with a Segmental Launching Gantry (LG) is a very popular way used for the construction of bridges and viaducts with small curve and long span...
    See Detail
    Beam Launcher
    Beam Launcher
    Beam Launcher is widely used for erection of precast concrete girders with almost all types of cross-sections, including I-beams, T-beams, U-beams, etc., It is designed for highway and railway...
    See Detail
    Full Span Launching Gantry
    Full Span Launching Gantry
    The equipment was developed and designed by our Huada Heavy Industry Design Department for high speed railway bridge and cross-sea bridge construction by full span launching method (commonly known as FSM)...
    See Detail
    Segment Lifter
    Segment Lifter
    Segment Lifter (referred to as bridge deck crane for pre-cast segment balanced cantilever construction) is mainly used for assembling construction of roads, cross river cross sea steel box beam of cable-stayed bridge, the equipment is installed on the bri
    See Detail
    Inquiry
    If you have any questions about our products, please contact us in time, we will reply to you the first time
    Name :
    * Email :
    Tel :
    Country :
    * Messages :
    Send
    Reset
    Top